Do y’all make one that threads into the left handed side and not the side where the brace folds up

At the moment, we don’t offer a left-handed option for the Upper Rail.

Will folding stock close flat, if I install the Recover Tactical Brace Upper Rail? Since it only mount on one side.

Yes, it should clear the Upper Rail.

Is this compatible with the S-pro as a lower profile option?

No, it is not compatible with the S-Pro.

Just installed the rail on my new 20/20 brace. The rail is slightly higher above the slide in front than in the rear. It mounts at a an upward angle. I’m assuming it’s supposed to be that way?

Please send us a message at service@recovertactical.com so that we can assist you further.

If you take the gun out will the optic on the rail need to be re-sighted in?

Yes, as far as we've tested and our customer accounts it stayed zero, when taking it out on the kit.

Can I use the recommended torque spec for my Romeo red dot or do I have to use less since the rail is polymer?

The torque specification for the Romeo is 28-30 in-lbs. It's recommended to go with the lower end of the range, as it's mounted on a polymer rail.

is the rail reversible or only mountable to one side of the rail?

The Upper Rail can only be mounted on one side of the stabilizer and is not reversible.

is there any possibility you would make a metal version of this? would much like metal over plastic when it comes to mounting an optic

We currently don't have any plans for a metal version, but I'll pass your suggestion along to management.

Not very commercial. My complain about upper rail too low with suppressor high was delete....

We have sold MANY of these units. The response to this product has been overwhelmingly positive. I'm sorry that it does not work for you. You may send an email to service@recovertactical.com to return it for a refund.

I purchased the tactical brace upper rail for my 20/20 Glock stabilizer. The upper rail is missing the little tab that fits over the stabilizer as shown in the instructions. It looks like the tab was milled off, so the upper rail has only two attachment points: the screw and the pin. Is the removal of this tab a design change on your part? Or perhaps I received a used upper rail that someone had modified to remove the tab?

Sounds like it might be a defective product. Please send photos of the unit you received and this message to service@recovertactical.com and they will help you.

Will the 20/21 upper rail fit a 20/20 system? I've seen them marketed as universal (i.e. the upper rail is advertised to fit 20/20 and 20/21 braces).

No. The UR20 fits all our braces except the 20/21. The UR21 fits the 20/21

does it come with 2 side picatinny rails

It comes with 1. You can order additional side rails here.

Can I use this to mount a hunting handgun scope?

Yes, if it has a pic rail mount.

I’m having ejection problems with the upper rail on. I’ve got a g19 and it sometimes knocks the spent shell back into the chamber. Using FMJ and super sonic ammo. Just doesn’t seem to always clear.

Hmmm, this is the first we are hearing of an issue like this. Wondering if there is some slight error in the Stabilizer install that is causing the issue. Please photograph your setup, send an email to service@www.www.recovertactical.com and we will help you figure this out.

My upper rail is not parallel with the slide on my Glock 17. Did I do something wrong?

It should align. It may be a flaw in the product in which case we can send you a new one. Please send an email to service@www.www.recovertactical.com.

Stabilizer Kits & Compatible Accessories

Discover the 20/20 Stabilizer Kit Series and Compatible Accessories

The 20/20 series by Recover Tactical offers a complete system for turning Glock pistols into modular platforms with enhanced control and accessory support. This page includes every 20/20 stabilizer kit available—including the 20/20N, 20/21, and 20/80—plus all compatible accessories built to fit the system. Whether you’re building for range time, training, or defensive setups, each part is made for drop-in installation with no tools or gunsmithing required.

Stabilizer Kits & Compatible Accessories Pistol Conversion Systems & Accessories

Show Filters

Showing 1–12 of 59 results

2020 Accessories, On Sale, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

Recover Tactical Brace Upper Rail – Compatible w/ All Recover Stabilizers
Rated 4.80 out of 5
$34.95
Select Options View Details
Glock, 20/20 Glock Stabilizer Kits & P-IX Conversion System, 20/20N, Best Selling Products, Compact Rails and Over Rails, Conversion Kits, Featured, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, Stabilizers, WS

Recover Tactical® 20/20®N Stabilizer Kit for Glock – For all 9mm & 357 Double Stack Gen 1-5 Glocks incl. Glock 26. Compatible w/ all Double Stack Gen 1-4 SW40 Glock incl. Glock 27
Rated 4.95 out of 5
Price range: $99.95 through $199.95
Select Options View Details
Stabilizer Kits, 2020 Accessories, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, On Sale, Stabilizer Kits & Compatible Accessories, WS

MG9 Angled Mag Pouch For Glock Magazines
Rated 4.95 out of 5
$49.95
Select Options View Details
20/20 Glock Stabilizer Kits & P-IX Conversion System, Conversion Kits, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, P-IX Conversion Kits - AR Platform for Glock Pistols, P-IX Conversion Kits & PFA Pistol Carbines, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

Recover Tactical P-IX+ Modular AR Platform for Glock Pistols
Rated 4.85 out of 5
Price range: $299.94 through $424.95
Select Options View Details
2020 Accessories, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Holsters, Holsters - new, Newest Products, Polymer80, Smith & Wesson, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

G7® OWB Holster for all Double Stack Glock, P80, Smith & Wesson, Springfield, Sig Sauer, & CZ 9mm/SW40/357 pistols that have an integral rail – (Recover Stabilizer Brace Compatible)
Rated 4.67 out of 5
Price range: $14.95 through $59.95
Select Options View Details
Glock, 2020 Accessories, Best Selling Products, Compact Rails and Over Rails, Featured, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, On Sale, P-IX+ Accessories, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

Recover Tactical® Stabilizer Picatinny Side Rails (Includes left & right rails)
Rated 5.00 out of 5
$19.95
Add to cart View Details
20/20 Glock Stabilizer Kits & P-IX Conversion System, Best Selling Products, Compact Rails and Over Rails, Conversion Kits, Featured, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, Stabilizers, WS

Recover Tactical® 20/21 Stabilizer Kit for 10mm/45ACP Large Frame Glocks
Rated 4.62 out of 5
Price range: $99.95 through $199.95
Select Options View Details
On Sale, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

Recover Tactical Cheek Rest for 20 Series Stabilizers
Rated 4.83 out of 5
$49.95
Add to cart View Details
Glock, Best Selling Products, Compact Rails and Over Rails, Featured, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, Rail Adapters, 20/20N, 2020 Accessories, Stabilizer Kits, Stabilizer Kits & Compatible Accessories

Recover Tactical® 20/20®Series GB20 Glass Breaker w/ Optic Mount Attachment
Rated 4.75 out of 5
$49.95
Add to cart View Details
20/20 Glock Stabilizer Kits & P-IX Conversion System, Best Selling Products, Compact Rails and Over Rails, Conversion Kits, Featured, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, P80 Only, Polymer80, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, Stabilizers, WS

Recover Tactical 20/80 P80 Stabilizer Kit – PF940C, PF940V2, PFC9 & PFS9 Compatible
Rated 4.92 out of 5
Price range: $119.95 through $219.95
Select Options View Details
Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, On Sale, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

MG45 Angled Mag Pouch For Large Frame Glock Magazines
Rated 5.00 out of 5
$49.95
Select Options View Details
Conversion Kits, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, S-Pro, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

S-PRO Pistol Stabilizer Conversion Kit for Glock, Canik, PDP, Hellcat, PSA Dagger, & Sig
Rated 5.00 out of 5
$299.95
Select options View Details

Showing 1–12 of 59 results

More About the 20/20 Stabilizer Kit Series

Every item in this collection is engineered to support the 20/20 stabilizer platform and expand its capability. From thumb rests and rails to holsters and charging handles, each accessory is tested for compatibility and practical use in real handling scenarios. Built from high-strength polymer and field-tested with multiple Glock formats, this lineup offers modularity without compromise. Explore the full system or start with a core kit and upgrade as your setup evolves.

Stabilizer Kits & Compatible Accessories

Discover the 20/20 Stabilizer Kit Series and Compatible Accessories

More About the 20/20 Stabilizer Kit Series

Compatible With

Sort By