Recover Tactical P-IX+ Modular AR Platform for Glock Pistols

Will this fit a Glock 22 gen 2 that was a service gun for San Antonio police department

Is the PIX chassis compatible with the Ruger RXM? I have seen some people saying it does work, and some people saying it doesn’t. Any information would be greatly appreciated.

Will this fit a Glock 49?

Will this fit a P80 glock?

Does this fit the 19xv

I have a Gen 6 G45. Will this fit?

Will these fit a Palmetto state armory dagger, I do not have access glock yet but I have a dagger and I was wondering if it would fit that pistol as well?

Why not any for government issued Glock 21c?

I live in Florida would what options would I have to select to be able to order with no issues if any.

Does it work with frts.

How long does it usually take to deliver

Love the concept behind this package. Are there any plans to release a variant of this particular chassis that will support Glocks chambered in 45 ACP?

Is P-IX and the charging handle ambidextrous?

Will these fit the Glock 19 V? Also, a Derya DY9 kot would be amazing as well!

Can I order this meeting all California specs/requirements!

Does this support the Glock 19 MR918 shadow system?

Do any of your products with a glock19V with the ported slide and barrel

Does this fit a Glock 20 gen5?

Is this compatible with the new G19 gen6?

Hello, I'm a proud owner of P-IX+ and I love it. I have a question and/or a potential improvement idea. I use my P-IX with my Glock 17 Gen 3 and a red dot optic on the top rail. I have experienced loss of zero after removing the gun from the chassis and putting it back in. My guess is that there might be small variations in my gun positioning inside the chassis that affect my zero. Have you considered creating a special Metal Front Guard upgrade that would add some kind of clamp or retention system to firmly lock the gun in the chassis using the Glock's under barrel accessory rail as a locking point? Is that even possible? That is something for your engineers to wrap their heads around. I understand that Glock's accessory rail may be different for different Glock models and generations, so there is an opportunity to make variations of special Metal Front Guard for different Glock models. You could sell them as optional upgrade parts. Am I thinking nonsense? Or is there a spark of a good idea in my babble?

By anything chance will the Derya DY9 fit a P-IX?

WILL THIS FIT A GLOCK 26 GEN 3 WITH A GLOCK 19 OEM SLIDE?

How inches length its the P IX with folded tactical folding stock? Trying to make sure if will fit my standard siize for a PDW like a like for backpacking...

Since the Glock 26 is built like the 19, just shorter, will this accommodate at Glock 26?

does this come with a barrel extension to meet some states 16" barrel length laws?

Why not any love for the Glock .45 models? This platform would be great for a home defense upgrade but is not compatible with the Glock 30/21 models. .45 is a big go to round for home defense in the US, you guys are missing out on a lot of dollars on the table not making this available for Glocks .45 models

Testing

Is this platform compatible with the Glock 19x and the G-flex binary trigger?

Will it work for Glock 22 gen4 .40 cal

Will this other firearms there other platforms that are really close to the Glock shape and will you make for other models like Sig pand Springfield Echelon Thanks for your time

hypothetically, would this work with a switch on the glock ?

Are these legal in NY

I have a gen 5 Glock 45 mos, but I have an apex trigger installed in it, will I have to put the stock trigger back on in order for it to be compatible?

Is the m-lok functional for aftermarket attachments?

Will this fit a Glock 23 gen 5?

will the P-IX MG still work with a Glock 17 Gen 3 that has a 5 inch barrel on it?

2 questions..... First, is the P-IX+MG version a folding stock? I can't seem to find the answer. Second.... The buffer tube is standard mil-spec I assume, so I can swap the stock for a brace (SBA3)? Thanks!

Do you ship to Illinois and will this work for a Generation 5 Glock 17?

What is the overall diameter of the metal front guard?

What is the difference between the basic and the MG

I see in some of the product pictures there are suppressors attached. Is there a list of suppressors that are compatible with the frame? I also assume that the model of glock will be dependent on fitment. Any info would be greatly appreciated

Is this conversion kit legal in wisconsin. I keep trying to look it up, but nothing specific pops up

I am missing some parts. The lower for the charging handle that is optional and the two side picatinny rails. Can I purchase these separately?

Do you ship to Washington State?

Is it compatible with a Gen 2 Glock 22?

Have you tried to see if the Stoeger STR9 will fit?

Does the kit also increase the barrel length & rifling of the glock you equip it with?

Are you able to answer whether this complies with california laws or not? If so can it be shipped to california?

No offense but I want to make sure I’m good to go before I drop a pretty substantial amount of money on this product. I have a Shadow Systems DR920. Am I good to go?

Forgive me if this has already been asked. I did not see it...Is the assembled device with pistol inside and folding stock considered an SBR?

Will Meprolight trudot sights on Glock 17 be compatible with the charging handle?

Q. Will it work well with GLOCK 17 gen 5 equipped with TruGlo TFX PRO rear sights (longer than factory installed sights)? answer now A. You'd have to modify the P-IX charging handle to accommodate the sights What do you mean by modify and who can do that?

Will it work well with GLOCK 17 gen 5 equipped with TruGlo TFX PRO rear sights (longer than factory installed sights)?

I have two questions, do you guys ship to California? Also does the Recover Tactical P-IX+ Modular AR Platform for Glock Pistols come with the charging handle?

I have a rmr red dot mounted on my slide. Will I have to remove the red dot to assemble it?

Is this compatible with gen 5 Glock 23?

Does it fit a Glock 26 and if not why doesn’t it. What make a subcompact different

WIll this fit a Glock 19 FS Gen 4 fitted with a Strike Industries G4 SlideComp (the old strike industries slide compensator, not the new mass driver comp)?

I've seen questions close to this but not 100%, so I'm asking. If the "without stock" option is selected can one be installed at a later date? Assuming all frames have the ability to have a buffer tube screwed in and secured with a castle nut the "without stock" option is either for those that don't want one or already have the "furniture" in their parts bin.

Is there a specific P-IX for airsoft or do you only make 1 version that works with real guns and airsoft guns?

Is it possible to mount MLOK side rails on it?

Do you know of anyone using a PSA dagger in your P-IX +? Any issues?

I have a Glock Performance Trigger installed in my Gen 5 Glock 19. Would that cause any compability issues?

does this fit a glock 19 gen 4?

It is compatible with G 45 THR ? Thanks!

Can the stock option be shipped to New Jersey

Is there a plan to make this compatible with compensated models like say a Gen 3 G31c?

is it compatible with glock 25?

Will a Glock 40 10mm fit this platform?

Does is only fit oem glocks? Or can glock clones fit? e.g: P80, PSA Dagger, Gst-9, Timberwolf etc?

I have an early Glock 19 (Law enforcement issued - mid 1980's), I assume is "Gen 1"? not specifically listed on the fit chart. Will this model actually fit? Also, can I order from NY but request delivery to other residence in Texas?

Sorry if this question has already been asked and I have seen the chart, from my u understanding it will fit but before I spend over $400 I want to make sure, I have a Glock 19 gen 5 will this fit?

Will you ship to California?

I'd like to hear you're in the works of making this platform for Baretta since you ALREADY have some products for the 92... I love my BC-2, but I would love the AR Platform EVEN MORE !!!!!!

Will this work with a airsoft glock. I saw a video ad that it does but just to confirm.

This looks like a really promising product. And seems to have a lot of design advantages over options offered by other companies manufacturing similar products. But I am concerned about loss of control of the trigger motion due to the design. In models offered by competitors, the operator fires using the origin pistol trigger. The problem is detailed here: https://www.youtube.com/watch?v=OCzqR4o8i9Y 4:45 minutes. Has this been resolved in the second generation model that you have released? Thanks,

It's this model coming to out for Taurus G2c?

Is the P-IX +MG legal in California.

Does this fit the Glock 21 Gen 4 .45 acp?

Will this work with a compatible glock with a longer aftermarket barrel like the Lone Wolf 6" or 9"?

Is this considered a sbr ; explains the legal issues of this product; nobody wants to end up in court for purchasing this item

When will the P-IX+ officially come out?

Will this ship to Illinois

Are there plans and if so what is the ETA for a Glock22 5Gen platform ?

Hello, I'm in the Philippines. Do you accept orders from here? I think your product accepts only Glock pistols, will you be having same item but for other gun brands, say CZ P10, Sig, Taurus G3 or other strikerfire type pistols? I do have a P10C pistol but don't have any glock.

Is it compatible with the G44?

I saw in one of the questions asked if a G19 with a Truglow site would fit and the response was, yes, if the site was removed. But yet on the Fit List for 19’s it starts with Gen 2. So the question is, will it fit an older G19?

How much is the faux silencer? I don't see it for sale on the website.

what is the weight of P-IX-B ?

Do you have any plans to make this for the P320? Or any of your other amazing products for the P320?

Will it work on a beretta apx centurion 9mm?

I've looked through the FAQs but didn't see anything reference the min/max magazine capacity. Will the 15 round glock mag fit?

Please make a Glock large frame option ie 10mm, .40

Will this work with suppressor sights

when will the next 2.0 model be released?

Can I purchase the tube and adjustable stock from you separately? I purchased the P-IX from a dealer at a Gun show and it came with the blade type brace and the tube is slick, no place for an adjustable stock to click in place.

I saw you said the glock 26 wouldn’t stay in place bc it doesn’t have a rail but I have a recover gr26 rail on think that’ll be enough to make up for the space?

Does this work with the PSA dagger?

Does it fit with glock 35?

Any plans for the glock 30 in the near future Majority of the people in Loxahatchee I've shown this to, tend to carry the same This would knock mck out of the water

Why doesn't it fit the Glock 22 gen 2?

Does it come with the charging handle for both hand, Or just for right hand ?

Will a Glock 17M fit the P-IX?

Does it work for the Glock 19x? And do you ship out side usa like saudia arabia ? Thank you ..

I kinda feel confused about the chart. Is it saying the ones that it’s not able to work with or the ones it does work on

Does it work for the Glock 21 sf

Any plans for the P80 version, yet?

What is the maximum diameter of suppressor can fit this chassis

I have a Glock 22 and a Glock 34 both are probably 10 years old . Will both work in this particular shell?

How can I buy it in Europe/Poland??

how would one connect a folding stock

Will it fit a glock 19 with a flared magwell just curious if i need to take it off before inserting.

Will this product fit a glock 17L gen 3

Is this compatible with a Glock 19x + suppressor??

If I beg hard enough, will you make one for Glock 29??

Glock 17 Gen 4. When the slide locks back after last-round hold-open, how do you access the slide release lever on the lower? It seems to be covered up and I can't get to it.

What all sights work with the P-IX?

What does the adjustable trigger mean?

Hello, I've purchased several of your 20/20 and 20/21 braces for my Glocks, probably gonna run one of these in the near future, however what I would love more than anything it to have something for my Springfield products. Specifically the XDM line. As far as product carry over what works for the standard XDMs will also work for their elites. The overall gun is the same. Will y'all please do something for the XDMs.

Some pics show with an attached longer barrel. Is this available from you?

How do you feel about people asking questions and wanting answers that they can find themselves by reading the description or applying common sense?

Will you be making a version for p80 frames?

Will it work with a aftermarket timney trigger?

I noticed it doesn't work P80 Glock clone. Will it work with any Glock clones such as the Rock Island STK100, PSA Dagger or other Glock clones? If not are there modifications a gunsmith could do that would make a clone work?

Does it fit a Glock 22 gen 5 ?

I don’t see Glock 27 Gen 5 on the list, anything in the works for that model 27-gen 5

In the near future is it going to be compatible with glock 30 .45 ACP?

Why is the upper rail missing?

What is the difference between B and MG??

Initially, the upper rail was connected. However, recent photos and images do not have the upper rail on the shell outlet side. Has the design changed to missing upper rail?

is it legal in california

If you have a gen 3 g17 glock oem slide, Internal parts and trigger on a p80 bottom will it fit? If not what is the real difference in Dimensions that keeps it from fitting

How much longer? (Exact date/time)

Probably should have specified, my Glock 45 mos has a Holosun 507k x2 ALREADY mounted to it permanently. Can you remove the top pic rail so you can insert the Glock WITH the Holosun on the Glock into the platform?

Will the mag pouch and side rails that I already have on my stabilizer brace fit the P-IX ? If my G19 Get 5 has the optic already installed will I have to remove it and reinstall on the P-IX top rail ?

Do you have an option where I can buy it with the pistol brace/stabilizing fin instead of a stock so I don't have to SBR it?

Will this take a Glock 45 with a Holosun 507k x2 red dot?

Will this fit Glock 23 Gen 2

can the grip be swapped out for one of my choice?

Does it work for a gen 5 Glock 17

I'm looking to get this with a collapsible PDW-style brace such as SB Tactical's SBPDW or Maxim Defense CCS. Will it fit and clear the brace's rails when fully collapsed?

Will this work with an airsoft Gun1:1 replica with one of the compatable glocks?

When will the first pre-order be delivered?

Are you using a mil-spec safety from standard AR lower?

Will this fit a Glock 17 that has suppressor height sights on it?

When are you GD shipping?

Is there an option to attach a pic rail to the back for foldy thingys?

Will it work with a Glock 17L? Sorry if this has been asked before.

Does this fit a glock 20 10mm?

Does it come with the charging handle accessory?

Will a Glock 19 with Truglo night sights fit in this? They are a bit thicker than the factory Glock sights.

Any plans on making a P320 version?

Will a glock 35 gen 3 competition frame fit in this

So this will fit a Glock 23 gen 4 right

Will polymer80 G22 and G17 fit in the P-IX AR?

Will this fit a Glock 29 10mm

Is the Stock with buffer tube collapsible or fixed (pinned)?

Is the top picatanny rail made of plastic or metal? Also does the glock wiggle or move at all when it's in the shell?

Since you're not using the Glock trigger, what is the trigger pull like?

Date available?

What glocks is it compatible with? Can't help but feel like that should be in the description. Work with glock 34??

Is this compatible with the Glock G44?

I purchased a fake suppressor for my PIX. I'm wondering if the diameter will be too large for it... what is the right diameter size to fit in this?

Will the pix work with a Glock 40 with the Recover rc12 rail

What time of March do you expect the products to be delivered ?

Can this be used with aftermarket trigger and extended mag release

are there plans to make a version compatible with P80?

Will this be available for g43x, and do you ship to israel?

Are there any plans on releasing P-IX for larger framed glocks, such as g20 or g21

Are you planning to release a left hand safety version?

Will this be available for Gen2 G19?

Will the stock version ship with buffer tube installed?

Is this legal in california

Will you be able to ship internationally? If so, how would I go about pre-ordering and shipping, Kind regards

Will any AR buffer tube work on the brace?

Is this compatible with the Hera Buttstock thumb hole grip? Are the specs from the buffer tube, the thumb curve and grip mount the same as oem at specs?

What is the difference between the B and the MG versions? I can't find I formation on that anywhere

Will this be compatible with a Glock 23 Gen 2 with a Recover Tactical Rail Adapter ?

DOES THIS PLATFORM FIT GEN 1 GLOCKS 40 CAL

Do you have a video test firing the Recover Tactical P-IX mount ?

Are you planning on manufacturing one for G20/G21's. This seems perfect for 10mm's.

So it's compatible with gen 3&4 Glock 22 but not the gen 5. Why is that?

If you choose the “No Stock” option does it ship with a buffer tube attached or do you have have to purchase that separate? Thanks.

G37 isn't on the fit chart. Is this correct or an oversight?

How can i release the barrel when is all open after the last round?is there some button or else? Thnx

Will a version for the M&P 2.0 eventually be offered?

Compatibility with a Gen 2 17 and rail adapter? I have a Gen 2 17 in the safe feeling real lonely.

Will there be a quick insert for the charging handle to quick attach to your pistol and into the PIX?

Does this come with a coupon to get your dog cremated after the ATF declares this illegal? asking for a friend

Wouldn't the stocked version be an SBR?

Will a PSA Dagger fit in this?

What is the device made of? Polymer? Aluminum?

Does it come with let up sights already on it?

Does this work with p80

Are there any future plans on building in a folding stock mechanism pre-buffer threads or a picatinny stock mount option?

Does the buffer tube either fitted with a stock or brace fold? Or would I have to add an aftermarket folding mechanism?

Will this fit glock 19

Can this ship to California?

What buffer system is included with the stock option? Mil-spec or commercial?

Does this come with a pistol grip? Can I add any Vertical forward grip to this? Is this "mlok" or picitinny?

What is the total length of the unit with and without the stock extended?

Will this be able to ship to chicago Illinois?

Will this kit fit P80 Glocks?? Like a G17 or G19 Polymer 80? Thank you

From the way the pistol mounts in the unit, I don't understand why a G26 would not fit in it.

How much is it going to cost.

Will there ever be a version for large frames?

Is there a technical specs sheet anywhere? I'm curious on some of the main mechanism materials and such.

The picture shows a stock, would the shell or the Glock need to be registered as an SBR?

Is it specific generation glocks?

will this fix g43

Is there plans to release this for other pistol platforms? Beretta?

Is there any chance that there will be one for the CZ Shadow2 any time soon? 🤞

Do You have a Brace version availible as a package?

Will this work with 3rd party slides?

Is there a approximate release date and MSRP for the P-IX ?

What glock size/models does this chassis fit?

Is it compatible with G26?

Does the charging only attach to Glock frames with vertical factory serrations? What about aftermarket slides with angled serrations?

Which gen and models of glock is this compatible with?

Is this Connecticut Compliant?

Is this compatible with polymer80?

The charging handle seems a little like the MCK, which I feel is extremely flawed, please tell me it attaches to the slide more securely?!

Same as the only other question

I see that in some pictures, it has a brace and not a stock. Is this an option, or something I’d have to purchase somewhere else aftermarket? If it is an option, which one? I have the 20/20 and love it and would also like this one, but without needing a tax stamp. Thanks