Does a UCH low profile charging handle come with the standard 20/20 kit, or is a GBH charging handle compatible with the 20/20?

It comes with the UCH which is the upper charging handle.

Will this work with a leupold delta point micro installed since the battery compartment sits behind the slide?

We haven't tested it with this specific optic, but from the looks of it, it will not be compatible due to the battery pack's placement.

is this compatible with the Glock clone MR920 Foundation by shadow systems

No, our kits are tested to fit OEM Glock models.

I'm a left handed shooter is the 20/20 N ambidextrous and will the G7 holster for me as a left handed shooter?

No, the 20/20N is not ambidextrous. On the other hand, the G7 holster is ambidextrous.

How long is it when its fully assembled and do you guys have any options that do not fold?

Here's the dimension of the kit:Closed: 11" x 2" x 5" Open: 19" x 2.5" x 5"No, we don't have a kit that do not fold.

Dear Recover Tactical Team, Would this unit be compatible with my Glock 18C Threaded Barrel unit? I'm planning to operate this with suppressor on as well.

Yes, it should be compatible with the 20/20N kit. However, please keep in mind that the included charging handle will not work if the firearm has a switch. Additionally, you will not be able to use the SLX Shroud or the Glass Breaker due to the integrated compensator.

Will it fit a Glock 45 gen 6?

No, our kits are not compatible with Gen 6 Glocks.

Will a 20/20 fit a Glock 19 Gen 4 MOS with a Holosun 407K on it without removing the red dot when installing the included charging handle?

Yes, it will fit. You don't need to install the charging handle, as you can simply use your optic to rack the slide.

Will it work with backstraps installed on a G17 Gen 5?

No, you'll need to remove the backstrap for it to fit the chassis.

Will it fit a Glock 17L Gen 5 MOS?

Yes, the 20/20N is compatible with Glock 17L Gen 5 MOS.

Will it fit a gen 1 Glock 17 that has no accessory rail under the barrel

Yes, the 20/20N is compatible with Glock 17 Gen 1.

will this fit G40 4gen, 10mm?

We do have the 20/21 Stabilizer kit that is compatible with your Glock 40 Gen 4. https://recovertactical.com/product/recover-tactical-20-21-stabilizer-kit-for-10mm-45acp-large-frame-glocks/

Are any of your braces compatible with the large slide glocks, like the 29 and 30? Thanks Mike, for the detailed reply you send on my last question.

We do have the 20/21 Stabilizer kit that is compatible with large-frame Glocks.https://recovertactical.com/product/recover-tactical-20-21-stabilizer-kit-for-10mm-45acp-large-frame-glocks/

Will this work with a ruger rxm

No, this is not compatible with Ruger RXM.

When you have the front foregrip/mag holder attached, can you still holster it?

Yes, you can still use the G7 holster even if you have a mag holder attached.

Will it fit a gen 2 Glock 21?

The 20/21 Stabilizer kit is only compatible with Glock 21 Gen 3 to Gen 5 MOS including the SF.

On the Recover Tactical® 20/20®N Stabilizer Kit for Glock – For all 9mm & 357 Double Stack Gen 1-5 Glocks incl. Glock 26. Compatible w/ all Double Stack Gen 1-4 SW40 Glock incl. Glock 27 When I select the stock instead of the brace, does that make my Glock 47 an SBR or is it still a pistol brace?

Sure wish you could get a straight answer on this. I’ve posed it to these guys and my local ffl and everyone’s vage and beat around the bush, won’t give a straight answer.

Is it compatible with the Franklin Armory G-S173 binary slide for G17? I don't mind making minor modifications if needed.

We haven’t tested it with that specific configuration. However, we do have customers who have successfully used the kit with the Franklin Armory G-S173 binary slide.

Will this fit Ruger RXM?

At this time, we don’t a compatible S-Pro version for the Glock 43X. However, if we release one in the future, we’ll be sure to notify our mailing list.

What is the length of the basic 20/20 when folded?

The length of the kit would be 11" x 2" x 5"

I saw a guy on youtube using this for a taurus tx22. and it seemed to fit. can you guy see if it fits fine? i been kinda looking into purchasing a glock one day as well. so i can to see if this would work for this and future purchases.

We haven’t tested it with that model, so we can’t confirm compatibility. As a general rule, our kits are designed and tested to fit OEM models that is listed on our compatible models.

Will this fit a Derya DY9 ? (Glock 19 clone)

We haven’t tested it with that specific model. If we release a compatible version in the future, we’ll be sure to notify our mailing list.

Recover Tactical® 20/20®N Stabilizer Kit for Glock is legal in Washington State ?

None of our products, including the 20/20®N, require a license to purchase, as we do not sell serialized gun parts. However, due to the ever-changing nature of state laws, we are unable to provide legal advice. We recommend reaching out to your local FFL or gun store for assistance.

Will it fit on a Glock 23 Gen5?

No, the Glock 23 Gen 5 slide is not compatible with the 20/20N.

Dumb question, probably but does carrying with the brace folded and on the left side with the G7 holster cause any interference, or is there enough clearance for it to be folded in the holstered position?

Yes, there would be no issue with the G7 and the 20/20N even if its folded.

I’m assuming this will not fit a g20 gen3/4?

No, it will not fit the 20/20N, but we do offer the 20/21 Stabilizer Kit, which is designed for large-frame Glocks. https://recovertactical.com/product/recover-tactical-20-21-stabilizer-kit-for-10mm-45acp-large-frame-glocks/

Will this kit fit a 19X?

Yes, it is compatible with 19X.

Is it compatible with the glock 17L gen 5? ik it's not in the list but it did come out pretty recently and i can't see why it wouldn't fit. Thanks in advance 😁

Yes, it is compatible with G17L Gen 5.

Do you know if this is compatible with the Advantage Arms .22lr conversion kit slide?

We haven’t tested it with that specific model. If we release a compatible version in the future, we’ll be sure to notify our mailing list.

Any idea if this will work with an aftermarket SCT Glock 19 frame? It is very similar to the Glock, however it has 4 pic slots like the P80. Any help on whether I should try the 20/20 or the 20/80 would be appreciated. Thanks

No, in theory, it would fit an exact clone. However, I don’t believe any models are exact clones.

Will this fit a Taurus g3

No, this will not fit the Taurus g3. If we do add a compatible version, we will send out an email to our mailing list.

Will the 20/20N fit a Glock 19 Gen 1? Thanks

Yes, the 20/20N is compatible with the Glock 19 Gen 1.

Would you know if it's compatible with P80 PF940SC?

The 20/20N is not compatible, but the 20/80 Stabilizer Kit is. It has been designed and tested to fit the following models: PF940V2, PF940C, PFC9, and PFS9. I've added a link below.Recover Tactical® 20/80 Stabilizer Kit

Any plans on making a stock/brace kit for the Canik lineup?

Yes. We will send out an email to our mailing list if anything new is released.

Would it be reasonable to expect a Dagger compatible version in the next couple years or not?

Maybe. Not sure. Although I have seen users get this model to work on a Dagger. According to one thread on Reddit, the Dagger frame fits in the kit. But the bundled charging handle won't fit the slide - unless you are running an OEM Glock slide (is that possible?). Since the kit covers the slide grips, you will need an alternate way to rack the slide. Many users just use their installed red dot as a charging handle. Just to be clear, we have not tested with PSAS so this is all based on user feedback. Hope this helps.

Confused? Will this fit a Glock G19 Gen 5 with AmeriGlo sights?

It fits G19, Gen 5. In terms of Ameriglo, they make many different types of sights. The only potential issue there is that depending on which Ameriglo sight, you may not be able to install the included charging handle. Since the kit covers the slide grips, you will need an alternate way to rack the slide. Many users just use their installed red dot as a charging handle. If that works for you, you are good to go.

Will this work with the Franklin armory Binary Trigger slide? I’m unsure if the G18 style Binary switch will interfere with the frame or not. Thank you so much

Yes, as long as the frame is Glock. The only issue I foresee is that the bundled charging handle will not fit. Since the stabilizer frame will cover the slide grips, you"ll need an alternate way to rack the slide like a red dot sight.

Can a Glock GTL 11 tactical light fit on the lower picatinny rail?

All of our rails are "Picatinny". According to one seller of these lights I found through a search (huntac.de), these lights are Picatinny rail mounted - so it should work. If you haven't yet purchased a light, I can recommend our curated collection of weapon lights here.

Hi. Will is the 20/20N compatible with the Glock 43x MOS model? Your reseller, Zahal.org, indicates that it is so wanted to confirm with you. If not, what would be the compatible stabilizer+brace kits compatible to the Glock 43x MOS. Thanks in advance!

You need the 20/20N43. It is the same as the 20/20N but includes 3 additional parts that enable compatibility for G43X (exactly my personal setup). Click here to see it.

Can you provide a list of all the non-compatible glocks. Looking to makes sure the fit is perfect on the 20/20N

Can't provide a list of non-compatible Glocks, but this is the full list of compatible Glocks: Fully Compatible with these GLOCK pistols, ALL GENERATIONS*G17, G19, G24, G25, G26*, G31, G32, G34, G45 Fully Compatible with these GLOCK pistols, ALL GENERATIONS* EXCEPT GEN 5 SLIDES.G22, G23, G24, G27*, G35 While the 20/20N Stabilizer frame itself is compatible with GEN 5 .40 G22, G23, G24, G27*, G35 Glock models, with these models, the GEN 5 slide is not compatible with the bundled charging handle. Since the Stabilizer frame covers the slide grips, you will need an alternate way to rack the slide like an RMR or some other solution. If you have a GEN 5 slide and an alternate way to rack the slide, you can use the 20/20N. If you have any of these Glock models G22, G23, G24, G27*, G35 WITHOUT a GEN 5 slide, the 20/20N is fully compatible. *There are known fit issues at times with the UCH17 Charging Handle and the Glock 26/27 frames. The UCH17 Charging Handle is not compatible with RTF “Moon Cut” slides

Will it work with a Glock 20 gen 5

No, but the 20/21 stabilizer is. See it here.

Is this California legal?

Apologies but we are not able to provide legal advice. You may check our disclaimer here. Any further questions should be addressed to a lawyer.

Will this fit a model 24 Glock?

Yes. As long as it does not have a Gen5 slide. If it does, 20/20N is still compatible but the bundled charging handle is not, so you need to find and alternate way to rack the slide like an RMR.

Is there a way to remove the brace? So we can operate it "braceless"

Sure. Remove the pin on the rear.

Does the 20/20 come with the upper rail mount for mounting a sight? Does it come in one of the kits?

It is not included in the kit and is available for purchase separately.

Is the new rule affect these braces ?

We don't provide legal advice. You can read our disclaimer here. Any follow-up questions should be addressed to a lawyer.

Glock-Compatible Accessories for Tactical Upgrades and Custom Builds

Glock-Compatible Accessories for Tactical Upgrades and Custom Builds Pistol Conversion Systems & Accessories

Show Filters

Showing 1–12 of 72 results

Glock, 20/20 Glock Stabilizer Kits & P-IX Conversion System, 20/20N, Best Selling Products, Compact Rails and Over Rails, Conversion Kits, Featured, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, Stabilizers, WS

Recover Tactical® 20/20®N Stabilizer Kit for Glock – For all 9mm & 357 Double Stack Gen 1-5 Glocks incl. Glock 26. Compatible w/ all Double Stack Gen 1-4 SW40 Glock incl. Glock 27
Rated 4.95 out of 5
Price range: $99.95 through $199.95
Select Options View Details
Stabilizer Kits, 2020 Accessories, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, On Sale, Stabilizer Kits & Compatible Accessories, WS

MG9 Angled Mag Pouch For Glock Magazines
Rated 4.95 out of 5
$49.95
Select Options View Details
20/20 Glock Stabilizer Kits & P-IX Conversion System, Conversion Kits, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, P-IX Conversion Kits - AR Platform for Glock Pistols, P-IX Conversion Kits & PFA Pistol Carbines, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

Recover Tactical P-IX+ Modular AR Platform for Glock Pistols
Rated 4.85 out of 5
Price range: $299.94 through $424.95
Select Options View Details
2020 Accessories, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Holsters, Holsters - new, Newest Products, Polymer80, Smith & Wesson, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

G7® OWB Holster for all Double Stack Glock, P80, Smith & Wesson, Springfield, Sig Sauer, & CZ 9mm/SW40/357 pistols that have an integral rail – (Recover Stabilizer Brace Compatible)
Rated 4.67 out of 5
Price range: $14.95 through $59.95
Select Options View Details
Glock, 2020 Accessories, Best Selling Products, Compact Rails and Over Rails, Featured, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, On Sale, P-IX+ Accessories, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

Recover Tactical® Stabilizer Picatinny Side Rails (Includes left & right rails)
Rated 5.00 out of 5
$19.95
Add to cart View Details
Best Selling Products, Compact Rails and Over Rails, Featured, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, Picatinny Rails, Rail Adapters, Rails, WS

GR43 Compact Rail Adapter For The Glock 43 43X and 48 (NOT FOR MOS THAT ALREADY HAS A RAIL)
Rated 4.94 out of 5
$29.95
Add to cart View Details
20/20 Glock Stabilizer Kits & P-IX Conversion System, Best Selling Products, Compact Rails and Over Rails, Conversion Kits, Featured, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, Stabilizers, WS

Recover Tactical® 20/21 Stabilizer Kit for 10mm/45ACP Large Frame Glocks
Rated 4.62 out of 5
Price range: $99.95 through $199.95
Select Options View Details
Best Selling Products, Compact Rails and Over Rails, Featured, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, Picatinny Rails, Rail Adapters, Rails, WS

GR26 Rail Adapter For The Glock 26, 27 and 33
Rated 5.00 out of 5
$29.95
Add to cart View Details
Compact Rails and Over Rails, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Picatinny Rails, Rails, WS

OR43 Sub Compact Rail Adapter For The Glock 43 43X and 48 MOS (that has a factory rail)
Rated 5.00 out of 5
$29.95
Add to cart View Details
Glock, 20/20N, 2020 Accessories, Best Selling Products, Compact Rails and Over Rails, Featured, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories

Recover Tactical® 20/20®Series GB20 Glass Breaker w/ Optic Mount Attachment
Rated 4.75 out of 5
$49.95
Add to cart View Details
20/20 Glock Stabilizer Kits & P-IX Conversion System, Best Selling Products, Compact Rails and Over Rails, Conversion Kits, Featured, Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, Newest Products, P80 Only, Polymer80, Rail Adapters, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, Stabilizers, WS

Recover Tactical 20/80 P80 Stabilizer Kit – PF940C, PF940V2, PFC9 & PFS9 Compatible
Rated 4.92 out of 5
Price range: $119.95 through $219.95
Select Options View Details
Glock, Glock-Compatible Accessories for Tactical Upgrades and Custom Builds, On Sale, Stabilizer Kits, Stabilizer Kits & Compatible Accessories, WS

MG45 Angled Mag Pouch For Large Frame Glock Magazines
Rated 5.00 out of 5
$49.95
Select Options View Details

Showing 1–12 of 72 results

Highlighted Glock Accessories and Upgrade Options

RC12 Rail and Clip – Glock Gen 1 and 2

Drop-in rail adapter designed for Glock 17 and 19 Gen 1 and 2 pistols. Includes an optional metal belt clip for right or left hand draw. Installs quickly with no modifications required.

MC17 Magazine Clip System

A modular magazine base that lets you attach a clip or Picatinny rail for custom carry setups. Includes base plate adapter, clip, rail, and cover. Ideal for concealed or backup carry without a pouch.

MG9 Angled Mag Pouch

A low-profile angled mag holder designed for range use, training, or stabilizer builds. Offers fast reload access and a lightweight carry profile.

Common Questions

Are these accessories compatible with Gen 5 Glocks?

Some are, but not all. Compatibility depends on the product. Refer to the fit chart on each item’s page for accurate information.

Do I need tools to install these parts?

No tools are required. All accessories in this collection are built for drop-in installation and do not require permanent changes to your Glock.

Need Help Choosing the Right Setup

If you are unsure which accessory works with your specific Glock model, our support team can help guide your selection. Look for compatibility information on each product page or reach out directly with any questions.