Does it work with frts.

We haven’t tested it with that specific setup and we can't confirm compatibility. However we've seen some customers have FRT on their kits.

How long does it usually take to deliver

Our standard turnaround time is 1–2 business days if the items are in stock.

Love the concept behind this package. Are there any plans to release a variant of this particular chassis that will support Glocks chambered in 45 ACP?

At this time, we don’t have any plans for a compatible version. However, if we release one in the future, we’ll be sure to notify our mailing list.

Will these fit the Glock 19 V? Also, a Derya DY9 kot would be amazing as well!

Yes, it will fit Glock 19 V but not the DY9.

Can I order this meeting all California specs/requirements!

At this time, we have recently stopped shipping our kits to California due to significant changes in state law.

Does this support the Glock 19 MR918 shadow system?

No, the PIX+ has been specifically tested and confirmed to fit OEM Glock models.

Do any of your products with a glock19V with the ported slide and barrel

No, the PIX+ is an enclosed chassis and is not designed to vent the gases from a ported slide/barrel safely.

Does this fit a Glock 20 gen5?

No, the PIX+ is not compatible with the Glock 20 Gen 5.

Is this compatible with the new G19 gen6?

No, its not compatible with Gen 6 Glocks.

Hello, I'm a proud owner of P-IX+ and I love it. I have a question and/or a potential improvement idea. I use my P-IX with my Glock 17 Gen 3 and a red dot optic on the top rail. I have experienced loss of zero after removing the gun from the chassis and putting it back in. My guess is that there might be small variations in my gun positioning inside the chassis that affect my zero. Have you considered creating a special Metal Front Guard upgrade that would add some kind of clamp or retention system to firmly lock the gun in the chassis using the Glock's under barrel accessory rail as a locking point? Is that even possible? That is something for your engineers to wrap their heads around. I understand that Glock's accessory rail may be different for different Glock models and generations, so there is an opportunity to make variations of special Metal Front Guard for different Glock models. You could sell them as optional upgrade parts. Am I thinking nonsense? Or is there a spark of a good idea in my babble?

Thank you for your feedback! I will make sure to pass your comments along to our management and engineering teams for review.

By anything chance will the Derya DY9 fit a P-IX?

At this time, we don’t have any plans for a compatible version. However, if we release one in the future, we’ll be sure to notify our mailing list.

WILL THIS FIT A GLOCK 26 GEN 3 WITH A GLOCK 19 OEM SLIDE?

No, the PIX+ is not compatible with a Glock 26 Gen 3 even if it has a Glock 19 slide.

How inches length its the P IX with folded tactical folding stock? Trying to make sure if will fit my standard siize for a PDW like a like for backpacking...

Here's a dimension of the kit when folded.

Since the Glock 26 is built like the 19, just shorter, will this accommodate at Glock 26?

No, the charging handle is not compatible with a Glock 26.

does this come with a barrel extension to meet some states 16" barrel length laws?

No, you need to order it separately.

Why not any love for the Glock .45 models? This platform would be great for a home defense upgrade but is not compatible with the Glock 30/21 models. .45 is a big go to round for home defense in the US, you guys are missing out on a lot of dollars on the table not making this available for Glocks .45 models

I’ll go ahead and share this with our management and engineering team. If we release a compatible version in the future, we’ll be sure to announce it through our mailing list.

Is this platform compatible with the Glock 19x and the G-flex binary trigger?

We haven't tested it with this specific trigger. If it has the same profile as the OEM trigger, then we believe it should work.

Will it work for Glock 22 gen4 .40 cal

Yes, the PIX+ is compatible with Glock 22 Gen 4.

Will this other firearms there other platforms that are really close to the Glock shape and will you make for other models like Sig pand Springfield Echelon Thanks for your time

We haven’t tested our product with those specific models, and at the moment, we don’t have any plans for a compatible version. However, if we do release one in the future, we’ll be sure to notify our mailing list.

hypothetically, would this work with a switch on the glock ?

No, the charging handle will not fit the Glock if it has a switch or without modification.

Are these legal in NY

None of our products, including the P-IX, require a license to purchase as we do not sell serialized gun parts. However, due to the ever-changing nature of state laws, we are unable to provide legal advice. We recommend reaching out to your local FFL or gun store for assistance.

I have a gen 5 Glock 45 mos, but I have an apex trigger installed in it, will I have to put the stock trigger back on in order for it to be compatible?

No, as long as both the frame and slide are OEM, then it is compatible.

Is the m-lok functional for aftermarket attachments?

No, the PIX+ is not compatible with an M-lok attachment.

Will this fit a Glock 23 gen 5?

No, this will only fit the Glock 23 Gen 4.

will the P-IX MG still work with a Glock 17 Gen 3 that has a 5 inch barrel on it?

Yes, it will work with our PIX+.

2 questions..... First, is the P-IX+MG version a folding stock? I can't seem to find the answer. Second.... The buffer tube is standard mil-spec I assume, so I can swap the stock for a brace (SBA3)? Thanks!

Yes, there is a folding option available under the stock/brace drop-down menu on our product page. Additionally, you are correct—the buffer tube is a standard Mil-Spec, so you can use any compatible stock with it.

Do you ship to Illinois and will this work for a Generation 5 Glock 17?

Yes, we do ship to Illinois, and it is also compatible with the Glock 17 Gen 5.

What is the overall diameter of the metal front guard?

The width measurement is 36mm (1.41 inches). If you're planning to use a suppressor, it might be best to remove the metal front guard, as Glock barrels move up and down during firing. Additionally, there are various barrel types for different Glock models compatible with the PIX, including those with a front screw attachment. Each setup may require a specific approach, so it's recommended to assess each case individually.

What is the difference between the basic and the MG

The PIX+ MG includes additional accessories such as the MG9 forward angled mag pouch and SR20 side rails (right and left), while the PIX+ Basic offers only the essential components: the P-IX+ housing, PG9 pistol grip with integral mag holder, Brace or Stock (depending on your selection in the drop-down menu), CR20 Cheek Rest, and Metal Front Guard. Additionally, when selecting from the drop-down menu, the description and image will update to reflect what’s included.

I see in some of the product pictures there are suppressors attached. Is there a list of suppressors that are compatible with the frame? I also assume that the model of glock will be dependent on fitment. Any info would be greatly appreciated

We don't have a list of compatible suppressors but it really just depends with which gun. You can use a suppressor with a G17, G34, G35 (or longer). With a Glock 19 for example, it sits too far and the barrel has to tilt up. If you use a suppressor with Glock 19, there is no room to let the barrel tilt up.

Is this conversion kit legal in wisconsin. I keep trying to look it up, but nothing specific pops up

We are not able to provide legal advice. I can say that we ship P-IX to Wisconsin regularly.

I am missing some parts. The lower for the charging handle that is optional and the two side picatinny rails. Can I purchase these separately?

The lower part of the charging handle is discontinued and is not necessary. The side pic rails are available for purchase separately here.

Do you ship to Washington State?

Yes. We ship to all US states and territories

Does the kit also increase the barrel length & rifling of the glock you equip it with?

This kit does not impact the barrel at all. However, if you opt for the 20/20TFA or P-IXPFA, they do include a longer barrel that is swapped with your factory barrel.

Are you able to answer whether this complies with california laws or not? If so can it be shipped to california?

We do ship these to California without issue. I can't comment on legal compliance.

No offense but I want to make sure I’m good to go before I drop a pretty substantial amount of money on this product. I have a Shadow Systems DR920. Am I good to go?

None taken. And to answer your question, it is not compatible with Shadow Systems. This is for Glock. Full compatibility list is available on this page.

Forgive me if this has already been asked. I did not see it...Is the assembled device with pistol inside and folding stock considered an SBR?

That is a legal question and we are not able to provide legal advice. Apologies. However, it has been discussed extensively online. I suggest you Google it.

Will Meprolight trudot sights on Glock 17 be compatible with the charging handle?

You may have to modify the charging handle a bit

Q. Will it work well with GLOCK 17 gen 5 equipped with TruGlo TFX PRO rear sights (longer than factory installed sights)? answer now A. You'd have to modify the P-IX charging handle to accommodate the sights What do you mean by modify and who can do that?

The charging handle fits perfectly over stock Glock sights. For taller sights, you can use a dremel to carve out space for them in the charging handle. If you're handy with a Dremel, you can do it. Otherwise, you may need to ask for help from a gunsmith or someone else who is handy and has the right tools.

Will it work well with GLOCK 17 gen 5 equipped with TruGlo TFX PRO rear sights (longer than factory installed sights)?

You'd have to modify the P-IX charging handle to accommodate the sights

I have two questions, do you guys ship to California? Also does the Recover Tactical P-IX+ Modular AR Platform for Glock Pistols come with the charging handle?

We do ship to California. And P-IX does include a charging handle

I have a rmr red dot mounted on my slide. Will I have to remove the red dot to assemble it?

Yes. You could mount the red dot on the P-IX+ upper rail

Does it fit a Glock 26 and if not why doesn’t it. What make a subcompact different

It doesn't fit. The P-IX is designed to hold compatible guns very securely in place inside the system. G26 is just not the right size for the system.

WIll this fit a Glock 19 FS Gen 4 fitted with a Strike Industries G4 SlideComp (the old strike industries slide compensator, not the new mass driver comp)?

This setup is compatible with P-IX+

I've seen questions close to this but not 100%, so I'm asking. If the "without stock" option is selected can one be installed at a later date? Assuming all frames have the ability to have a buffer tube screwed in and secured with a castle nut the "without stock" option is either for those that don't want one or already have the "furniture" in their parts bin.

The "without stock" option just means we won't include a stock or buffer tube. But you can definitely add your own. The system is compatible with all AR compatible stocks.