Will the 20/21 work with any .45 Springfield models? I'd like one for my xd mod 2 3.3" .45 or xdm 5.25 competition .45

No, the 20/21 Stabilizer kit is only compatible with large-frame Glocks.

Any for my psa dagger compact 9mm?

At this time, we don’t have a compatible version. However, if we release one in the future, we’ll be sure to notify our mailing list.

Why does the compatibility list lists glock 29 gen 3,4 and 5, but a response to a question says it doesn’t… also why would it not fit Glock 30 when they are virtually the same size

If the Glock 29 is listed on the compatibility table, that means we’ve tested and confirmed it for that specific model. As for the Glock 30, if your pistol has a rail, it should be compatible with the 20/21 Stabilizer Kit.

Any idea when you will have one to fit Glock SF 30 ?

At this time, we don’t have any plans for a compatible version. However, if we release one in the future, we’ll be sure to notify our mailing list.

I have a G40 gen 4 MOS will any optics work with this system

Yes, if it’s a slide-mounted optic, it should work—just note that you won’t be able to use the included charging handle. Instead, you can rack the slide using the optic itself. If you add the Upper Rail, then any 1913/Picatinny-compatible optic will fit.

Is there any way this would fit a S&W M&P 2.0 in 10mm?

At this time, we don’t have a compatible version. However, if we release one in the future, we’ll be sure to notify our mailing list.

Are the brace and stock the same length, angles, dimensions? Does the buttstock extension work on the brace? Does the cheek rest work on the brace? How much extra length does the BE add? Are the stock and brace interchangeable with each other?

Yes, they are the same length. The Buttstock Extension (BE) only works with a brace, while the Cheek Rest is compatible with both the stock and the brace. The BE adds about 1" to the length of pull (LOP). No, the kit does not come with an interchangeable stock or brace.

Will this work with my G20 Gen 5 MOS?Ive seen mixed answers.chart says it'll work with G21 Gen 5 MOS which I thought were pretty much identical in size other than caliber.

The G20 Gen 5 MOS will work with the 20/21 Stabilizer kit. We've already added it to our compatible list.

What’s the difference between the 20/21B and 20/21MG

20/21B – This is our basic kit, which includes the chassis and charging handle. 20/21MG – This is our fully kitted version, which includes the chassis, charging handle, holster, mag grip, and side rails for a complete setup.

Is this compatible with the Glock 20 gen3/4?

Yes, this is designed to fit large-frame Glocks.

Can this be transitioned to a lefty shooter? Can the brace fold to the shooter’s left side? Can the brace be used in the holster on the left hip? Is there a left side optic mount?

We do not have a left-handed configuration for our stabilizer kits at this time.

Will the 16 inch carbine conversion kit work with the 20/21 stabilizer and Glock 20?

Our carbine conversion kit is only compatible with the 20/20 stabilizer kit. At the moment, we don't have any immediate plans for other models, but if that changes, we will announce it via email.

No brace for Gen 1 Model 20

Yes, the 20/21 Stabilizer Kit is not compatible with the Glock 20 Gen 1.

Will this fit a Gen 4 Glock 30 (thick slide/frame)?

We do not yet have a stabilizer compatible with Glock 30

Will the 20/21 fit a gen3 glock 29sf?

It will not. You can see the full fit chart on this page and you can see further compatibility here.

What are the stipulations for the 90 day money back guarantee?

You can return the item for a full refund as long as it is in new/original condition up to 90 days from purchase. To initiate a return, fill out the Return Request form. Return shipping is paid by the customer.

I have a new Glock model 40 generation 4 MOS 10mm. Will your 20/21B with the Cheek Rest for 20 Series Stabilizers w/ Free Buttstock Extension (BE20 must come bundled together with the CR20) allow me to use my mounted Holosun model 507 Comp? I’ve read where some users with optics have done a work around modification to the supplied charging handle when there was interference between the optic and charging handle. I need to be able to use the optic I have mounted and sighted in. Also if there is any rubbing between the slide and the pistol mounting can a work around also be done there to provide clearance, just enough to prevent contact with the slide. Thanks for your time, patience, and help. Rob

Hi Rob, in many cases the bundled charging handle is not compatible when a red dot is also mounted. It's possible that you can make it work with a modification - but most users simply use the red dot as a charging handle. It is a setup common to many Recover brace setups. With correct installation, there will be no rubbing between the charging handle/slide and the frame.

The last option is Choose Version: Stock or Brace. What is the difference there?

They are very similar. The "brace" has a strap attached to the stock end and it is curved to enable the comfortable insertion of your arm into the strap. It is not intended to be shouldered. The stock version is straight on the stock end, has no strap and is intended to be shouldered. Here is a visual comparison (I recognize that the image could do a better job of showing the difference):

Is the charging handle the only caveat for the g41? And does it fit the g41 gen5? Thanks!

The default included charging handle doesn't fit a G41 so if you do have a G41, we send a different charging handle that is compatible. And yes, it is compatible with G41 Gen5

Does this make it an SBR under the new brace laws ??

You can read our disclaimer here. Any followup questions should be addressed to a lawyer.

I have a gen 2 g20 10mm bought new in 1994. Looked at the chart but did not see anything about early gen modelS.

20/21 is not compatible with Gen 2. This is what we have compatible with your exact model.

Will this fit the new large frame Gen 5s that have recently come out? The G20/21 MOS Gen 5?

Thanks for letting us know! We can now confirm 20/21 is compatible with G20 & G21 Gen5 and Gen5 MOS.

Will this fit a Glock 34

This model is not, but the 20/20N Stabilizer & P-IX are compatible with Glock 34.

Which option should I select if I have a Glock 40 gen 4 mos? B, S, H, Or MG?

Any of them will work. They all use the same base unit and are all compatible with Glock 40 Gen4 MOS. The only difference between the units is what comes bundled along with the Stabilizer itself. This is what is included in each of the 4 options: 20/21B – Stabilizer Frame, Brace w/Strap, UCH & GCH17 Charging Handles (low/high profile) 20/21S – Stabilizer Frame, Brace w/Strap, UCH & GCH17 Charging Handles (low/high profile), Minimalist Sling, Picatinny Side Rails 20/21H – Stabilizer Frame, Brace w/Strap, UCH & GCH17 Charging Handles (low/high profile), Minimalist Sling, Picatinny Side Rails, G7 Holster w/Pistol Adapter (Can be used without the stabilizer brace as well as with) 20/21MG – Stabilizer Frame, Brace w/Strap, UCH & GCH17 Charging Handles (low/high profile), Minimalist Sling, Picatinny Side Rails, G7 Holster, MG45 Angled Mag Pouch

Will my glass breaker from my Glock 19 kit and my side rail fit the 10 mm kit and also my angled front holder

They will both fit - but the MG9 angled mag pouch can't hold 10mm mags. You will need the MG45 for that (or the 20/21 MG kit).

Will this fit Glock 22?

For the Glock 22, you will need the 20/20N found here.

Can you run an optic with this kit?

Sure, just add the UR21 Upper Rail. You'll see the add-on after adding this to cart and proceeding to cart or checkout.

Why will this not fit a PF45? Is it the trigger guard geometry? Would the 1911version possibly fit?

The beaver tail of the pf45 is too long to fit in the chassis. It will work if you shave the beaver tail down. I have a picture on here (see the gold p80 suppressor setup). It will work as long as you're okay with modifying your frame. If you do not modify the frame, there is no way this unit will work.

My G26 fits fine in my 20/20, would the G29 work the same in the 20/21 variant?

G29 will not work in the 20/21 variant. G29SF does fit in the 20/20N

Do you have weights listed for each config somewhere?

Thanks. My weight should be 3lb 9oz. Typo.

If I’m going with a p80 10mm would this work on those frames? Because obviously the p80 frame offered on this site is for smaller 9mm models. I want to get a brace for my larger framed 3rd gen p8p Glock, but not if this doesn’t fit.

This is designed and tested to fit OEM Glock only.

What is the overall length with the stabilizer installed?

Approx. 272cm folded and 460cm extended

What model of any will fit a gen 5 Glock 22?

The 20/20N is compatible with G22. However, the GEN 5 slide is not compatible with the bundled charging handle. Since the Stabilizer frame covers the slide grips, you will need an alternate way to rack the slide like an RMR or some other solution. If you have a GEN 5 slide and an alternate way to rack the slide, you can use the 20/20N.

I have a Glock 21 with a factory picatinny rail. Will this still work?

These are the G21 models that the Stabilizer is compatible with: GLOCK 21 SF GLOCK 21 GEN 3 GLOCK 21 GEN 4 GLOCK 21 SF

Do you have a 20/21 for a p80 21

This is what we have for P80 at the moment: 20/80

I have the Glock 40 Gen4 MOS in 10mm, What option do I select for the question “ Is your weapon a Glock 41?” Because I’m under the impression that I need a different charging handle?

Choose "No" for "Is Your Weapon a Glock41?" and the charging handle will fit.

Will this work with a P80 PF45 frame?

No. We do carry the 20/80 which is compatible with these P80 frames: PF940V2, PF940C, PFC9, PFS9

Will this work with a gen 2 Glock 21?

No. Click on the fit chart tab to see the full compatibility list.

Will this work with my Zig M1911 A1

The 20/11 Stabilizer for 1911 will fit your weapon. You can see it here.

Is this kit compatible with a Glock 40?

That depends which generation you have. These are the Glock 40 models the kit is compatible with: GLOCK 40 GEN 3, GLOCK 40 GEN 4, GLOCK 40 GEN 4 MOS

If I bought the glock 20/21 stabilizer for my glock 40 in 10mm, would it still work with my glock 41 slide?

Yes. You would need the UCH17 charging handle instead of the UCH21 charging handle, that is why we ask the question which gun do you have in the dropdown above. Just choose "Yes" in the dropdown "Is Your Weapon a Glock 41".