Is there a plan to make a version that is compatible with Gen 4 Glocks? I have the 20/20 already, but have wanted to add a red dot, and this option would be perfect instead of buying a new slide.

The PCH is not compatible with the 20/20N Stabilizer kit. If you want to add an optic on your stabilizer kit you'll need the Upper Rail or Glass Breaker.

Just want to make sure I understand the list… Glock 32 all generations are compatible?

Yes, it fits OEM Glock 32 all generation.

Will this work with a Recover Tactical 20/20N brace? Or will it interfere with the inside channel of the 20/20N chassis? I want use this to mount an RMR riser atop a glock slide while using a 20/20N brace.

This won't fit on your weapon with the Stabilizer installed. If you want to add optics to your Recover Tactical Stabilizer, you can use the UR20 Upper Rail.

Will there be a similar product for glock 26 gen 1-4 in future?

At this time, we don’t have any plans for a compatible version. However, if we release one in the future, we’ll be sure to notify our mailing list.

dose not say if it will fit glock 26 gen 4 its double stack 9mm as well?

No it will not fit a Glock 26 Gen 4.

Does this fit a glock 23 gen 5??

Yes, it is compatible with Glock 23 Gen 5.

the serrations on my slide are slanted, is it not going to fit?

I don't think so, but to be sure, if your model is one of these, it will fit: G17 GEN1 G17 GEN3 G17 GEN5 G17 GEN5 MOS G17L G17P G19 GEN3 G19 GEN5 G19 GEN5 MOS G19X G22 GEN3 G22P G23 GEN3 G23P G24 G31 GEN3 G31 GEN3 G32 G34 GEN3 G34 GEN5 G34 GEN5 MOS G35 GEN3 G45 G45 MOS G17T G19T

will this work for a glock g22 4th generation 40 cal S&W

No. This is for the specified Glock models only. Full compatibility list above.

Is this Compatible with a Glock 48??? I want to Get My Dad an inexpensive reliable Upgrade for his anniversary

Thanks Ordered the Link for Him 👍

What about the Gen 2 Glock 19? I don't want to have to go and have my slide milled out in order to accommodate an Optic (namely my Holoson Green Dot)....... Oh, please say YES that it will.......

Sorry, that won't work. PCH works with the following Glock 19s: G19 GEN3, G19 GEN5, G19 GEN5 MOS, G19X. See the fit chart on this page for a full list of compatible models.

can i used the changing handle for a PSA Rock 5.7?

It's designed specifically for the listed compatible Glocks. If the model you mentioned is an exact clone, it will fit.

Can I use this with the stock sights? I don't want an optic, just a little racking assist.

Yes. It works with any sights including stock sights

Will it work with a Rock Island STK100 Glock 17 clone?

Probably not. The measurements are very precise. If the STK100 is an exact clone and it does work, we'd love to know.

will this work on a Gen 4 Glock 29?

Nope. See the Fit Chart tab on this page for a full compatibility list.

Will this fit glock 31 gen 4?

PCH does not work with Gen4 models

Will a version that’s compatible with the 20/20 brace ever come out?

No plans for that in the works.

Does this work with the Advantage Arms 22lr conversion upper?

This works only on OEM Glock slides for weapons listed as compatible here

When installed on my 17 gen1 the slide is rubbing the lower piece tabs. Are any adjustments nessasary to free-up the action?

Try filing it down a bit. If you have any issue after that, please reach out to customer service who can help service@recovertactical.com

The box this comes in has a check box for double stack and a box for single stack. Do you stock this in single stack? I have a 43 and a 43x.

At the moment, just this one. Stay tuned for new additions

This may be a silly question but ...... I have an aftermarket G 19 gen 3 slide that I forgot who was the manufacture but it sure looks like a stock slide rear serrations . What is your experiences with non Glock slides ? If it does not fit may I return to you if not buggered up ? Thanks , Barry

Can't say. If it is exactly the same, it could work. No guarantees though

Will this work with the Glock 44? It’s got a polymer slide and shoots 22lr. Based on a Glock 19 gen 5 dimensions.

It will not work with Glock 44. The fit on the slide has to be a perfect match.

Will this device mount on a Glock 23?

Yes, on these specific models: G23 GEN3, G23P

Why pic rail? Why not make it rmr compatible?

eh... lots of factors that go into product development decisions..

Will this work on an S&W. SD40VE ?

It is designed for and tested to work with Glock

How did you answer this question if G19 Gen 4 doesn't fit? And if it doesn't fit, are you making a PCH for the Gen 4's?

That answer was a mistake (corrected now). After careful testing, Gen 4 is not compatible. It's possible, we may have a version that is in the future

Does it fit glock 48?

It does not (see the fit chart tab above for full compatibility list)

Will this fit Glock G45 Gen 5 and the rail still allow use of Trijicon GLK Sup ns sights?

It does fit Glock G45 Gen 5. And yes, you can use it with the sights you mentioned.

I'm curious as to why it won't fit the Glock 26. Is it because there are not enough slide serrations on the back to fit the clamping parts?

The slide is not long enough on the G26

G19 Gen 2? Not listed but earlier question said it fit G17 Gen 1...If so please add

G19 Gen 2 is not compatible but we did add the G17 GEN1 to the list. Thanks for pointing that out.

I see that the PCH will fit a Glock 19, presumably a Gen. 4 as well, is this correct? Will it also fit a Glock 23 Gen. 4? Please attach my name to your mailing list. Thank You Much, Jack.

As it turns out, the Gen 4 is not compatible

Bonjour , est il possible de le commander et le recevoir en france par un autre moyen de transport ? celui que vous proposez est plus cher que le produit lui meme ! Merci a vous Auto translated from French: Hello, is it possible to order and receive it in France by another means of transport? the one you offer is more expensive than the product itself! Thank you

Priority Mail International is the cheapest international option we have. Autotranslated to French: Priority Mail International est l'option internationale la moins chère que nous ayons.

When this was first offered up back in September, it showed that it would work with the 20/20 stabilizer brace, which is why I put a pre order in for it? So this PCH 17 won't work with any stabilizer braces?

I'm not sure where you saw that but this is not compatible with our Stabilizers

Do you have a list of recommended optics that can be mounted to it?

We don't have a list - but it's a 4 slot picatinny rail so any optic that is designed to fit a 4 slot picatinny rail will fit.

So this won’t fit with the stabilizer? If you want a optic is it better to just purchase the top rail for the stabilizer?

This won't fit on your weapon with the Stabilizer installed. If you want to add optics to your Recover Tactical Stabilizer, you can use the UR20 Upper Rail.