Hello, will it fit a Mauser (GSG) 1911 .22lr (5inch barrel)? Thank you in advance

We have not specifically tested it with that model yet. Please measure the indicated points on your firearm using a ruler, and if the measurements match, it should fit properly.

will this fit a 1911 tisas carry 4.25 9mm?

No it will not fit the Tisas Carry.

Will it fit a rock island compact

The RIA uses a slightly different chassis than a standard 1911. The CC3C is designed to fit officer/compact single-stack 1911s that do not have an integrated rail.Measure these points on your gun with a ruler. If it matches, it will fit.

Do you have a grip kit to fit the Tisas Yukon 10mm?

At this time, we don’t have any plans for a compatible version. However, if we release one in the future, we’ll be sure to notify our mailing list.

Will this fit the S&W 1911 Mod410 40cal

At this time, we don’t have a compatible version for the S&W 1911 Mod410 40cal. However, if we release one in the future, we’ll be sure to notify our mailing list.

Will this fit the Rock Island Armory BBR 3.10?

No, the CC3C is designed for Officer sized 1911 and will not fit a sub compact BBR 3.10.

Do you make a grip & rail item for double-stack 1911's? Specifically a Para P13.45?

At this time, we don’t have any plans for a compatible version yet. However, if we release one in the future, we’ll be sure to notify our mailing list.

Does this work with the "thin grip" bushings on a S.A. Range Officer?

It does look like it would fit. However, just to make sure measure these points on your gun with a ruler. If it matches, it will fit.

Will this fit a girsan mc 1911 c xlv .45acp?

No, the CC3C grip and rail system is designed for 1911 models without an integral rail.

Are there any (light-bearing) holsters that will fit a compact "officer's" 1911 with the Recover CC3C Grip and Rail System?

We recommend MIE Holsters. They have compatible holsters for your setup.

I do not have a way to measure right now but wondering if this will fit a Tisas Carry - Stingray . Would you happen to know?

No, it will not fit the Tisas Carry - Stingray.

I don't mean to be a bother, but I have done the measurements on my Tisas Devil Ray Carry Bobtail Commander. Will this fit? It is the only size with a bobtail-like frame.

Id these measurements match on your gun, it will fit.

Does this fit the RIA 10mm 1911?

RIA makes at least 9 different 10mm models so I can't say for sure without knowing which one. The CC3C is designed to fit "Officers"/Compact 1911's that are single stack and do not have a built in rail. If you aren't sure what size 1911 you have, measure these points on your gun. If they match and your gun is a single stack without a built-in rail, it will fit: If the above measurements do not match your gun, you may have a full-size 1911. If you do, then check out our CC3H and CC3P which are designed for full size 1911's. The measurements below are what is needed for compatibility with CC3H and CC3P.

will they fit a springfield compact 45

Multiple models fit that description. Best way to check is to measure these points on your gun. If they match, it will fit:

Will this fit the smaller girsan 1911?

Not sure, but you can check easily by measuring these points on your gun. If they match, it will fit:

Will it fit, Springfield 1911 A-1 mil spec

This model is a full-size 1911 so you'd need the CC3P or CC3H

Will this work for a RIA BBR 3.10 subcompact 1911?

Not familiar with that model, but if you can measure these points on your gun with a ruler. If it matches, it will fit.

Will this work on a Springfield Armory 1911 EMP 4 LW Champion (Model #: PI9211L)?

Not sure. Measure these points on your weapon. If they match, it will fit:

Would this fit the Remington 1911 R1 commander? (4.25in barrel version)

No, but the CC3H & CC3P will fit

Will this fit my Browning 1911 22lr compact?

It will fit if your weapon is: Single stack Has no built-in rail And has these measurements:

Will this fit a Star BM 9mm?

It is possible but I am not sure. If you want to be sure, measure these points on your gun with a ruler. If it matches, it will fit.

This fit in a armscore 1911 16rd mag?

I think you are referring to this model? If yes, with a barrel length of 8.74in and a height of 5.51in, it would be a "Full Size" , double-stack 1911. If that is the case, we do not have a system for your model. We do have a system for Full Size 1911's - the CC3H & CC3P Grip & Rail Systems - which are designed for full size 1911's - but no double stacks - only standard full size 1911's.

Will it fit a Beretta APX A1 Carry (Optics Ready)?

The CC3C is only compatible with 1911 style models

will this fit a 92compact berreta ? 9mm

The CC3C will not fit a Beretta but if your gun as in an M9, we have a compatible model: https://recovertactical.com/product/bc2-beretta-grip-rail-system-for-the-beretta-92-m9/

I’m interested in this accessory. I have a Colt Mark IV Series 80 Officer’s Model .45 ACP. Built in 1989. The measurement of the handle screws match up with your diagram. However, the measurement of space from the front of trigger guard to the end of the barrel is closer to 2.5 inches rather than the 2.1 inches shown in your illustration. Just want to make sure of compatibility before I order it.

Sorry - if the measurements don't match exactly, it won't fit.

Will this fit a colt gold cup 1911 22lr?

No, but the CC3H and CC3P do fit your weapon.

Does it fit the ultra carry II

It will need to be modified slightly but yes. The rail will have to be shortened so that the CC3C is flush with the end of the Ultra. Also the bottoms of the grips will need to be shaved do that the magazine seats without obstruction. Very small and easy modifications. I used a small tabletop belt sander.