This has proven to be the most stable rail solution on the market as well as the most popular, and is easily installed on your gun in under 3 minutes. The high-grade, lightweight, glass-reinforced polymer ReCover can be installed without the need for a gunsmith, and requires no permanent modifications to be made to your firearm. The HPC is the most stable rail mount on the market and the added benefit of a Hi Power grip enhances the look of your firearm.
Hi Power Grips
Grip and Rail Systems are covered by US Patent 15688171
Features
The most stable rail solutions on the market
Install on your gun in under 3 minutes
High-grade, lightweight, glass reinforced polymer
Can be installed without the need for a gunsmith
Requires no permanent modifications to be made to your firearm
Lifetime Warranty
Made in Israel
Specs
Weight: 60g
Updated look for your gun
Superior ergonomic design
Full length MIL-STD-1913 Picatinny rail
Installation
Unscrew your old grips
Screw your new grip and rail system into place using existing hardware
Use supplied hardware to tighten rail into place
Hi Power Grips
Grip and Rail Systems are covered by US Patent 15688171
Faq
Q. Are the HPC grips fatter than standard grips?
A. They are not any thicker than standard grips.
Q. Will these work on a FEG and other clones such as the Kareen?
A. These will work on Browning and FN variations. If the clone is not a 1:1 copy, then it will not fit. We know that they fit on the Kareen, but do not fit on the FEG without modification.
Q. Are these sturdy enough to handle a light and hold 0?
A. We offer a lifetime warranty on these for a reason, they will hold 0 with a laser mounted and are even sturdy enough to use in conjunction with an upper rail.
Q. Do you have a holster that these will work with?
A. Yes, they are compatible with the Blackhawk Omnivore Holsters as well as other kydex and leather options.
Q. I am concerned that these will damage my gun
A. There is no way for these to damage your gun. We use the same glass reinforced polymer that most firearm manufacturers use to make their pistol frames.
Hi Power Grips
Grip and Rail Systems are covered by US Patent 15688171
Holsters
This system is compatible with the Blackhawk Omnivore Holsters as well as other kydex and leather options.
10 reviews for HPC Grip and Rail System for the Browning and FN Hi Power
Rated 4 out of 5
Philipp Eibner (verified owner)–
I purchased the rail in tan to give an old gun a newer more tactical look. Overall I am really happy with the quality, teh materials and the feel of the gun.
I give 4 Stars instead of 5 just because I got it in a different colour than I ordered it (I ordered tan but got green).
Rated 5 out of 5
The Curious Airgunner –
What a neat add-on to my! Ingilis GP-35 Hi-Power! I enjoy old style handguns. I have 2 sets of standard wooden grips. Saw this on sale and had to try it after some research.
It fits perfectly and allows me to mount a light or laser.
My Hi-Power is now my home defense weapon. .light and all.
Thanks for a great product.
Rated 5 out of 5
Ken Ryno –
Recover Tactical has made it possible to mount accessories to my Browning Hi-Power which until now was not possible without professional gunsmithing. I am thoroughly pleased with your product!
Rated 5 out of 5
Jamey Jones (verified owner)–
Did not like the original wooden grips that came on my Springfield Armory SA35 and thusly planned to semi-retire the gun after only a couple of outings. Stumbled across the RECOVER grips and decided to take a chance that they’d fit. They fit perfectly and the difference is amazing! The gun is now a pleasure to shoot and won’t be going into semi-retirement!
Rated 5 out of 5
David Lewis (verified owner)–
Really nice fit. Extension happy with product, and the ability to be able to put a light on my favorite carry pistol. Took less than 10 minutes to install, and I was extremely happy to see there were no gaps when it was on.
Rated 5 out of 5
Neal Craig Beverly (verified owner)–
Put the new cover on my 30 year old Hi-Power and I couldn’t be more pleased. Fit was perfect and it has a modern look and a functional rail. Thanks for the great product!
Rated 5 out of 5
Arne Sauwen (verified owner)–
Greetings from Belgium. I decided to order one in black for my MK1 last year, now I find myself ordering a second one in tan for my MK3. Awesome product!
Rated 5 out of 5
Wayne Crewe (verified owner)–
Good day
I have received my grip and rail for the HP Browning. Looks stunning. Im probably the only person in South Africa owning one. Thank you so much for my product
Rated 4 out of 5
Jerry –
1995 Browning Hi Power 40 cal. I decided to pick up a set of Recover Tactical grip & rail panels in OD because I thought they looked interesting. Previously had Hogue grips with finger grooves, which I am a big fan of already but they’re somewhat boring.
The finish on the panels is much cleaner and smooth than I saw in some Ebay pictures, so that was a pleasant surprise. I did, however, read a prerelease article somewhere that said they won’t lose zero for a laser. While I can see how that might be true for any of the other models that they support, I think that the single screw at the rear of the grip for the Hi Power that holds it directly to the frame allows for too much movement. Perhaps the panels could use a little reinforcement around the trigger guard, or something that causes it to snug up a bit more, but there is approximately 1/4 inch of movement at the front of the frame. So while I think this is not an issue for a weapon light, it looks like an issue for anyone relying on a laser (albeit not much of an issue at close range).
I have seen some photos online showing a perfect alignment with the contour of the slide (near the “box” opening above the rail, but there is about a 1/4 inch misalignment for mine. I am not too focused on that, but that misalignment carries out past the front of the slide. This seems quite sloppy to me, but is something I can always remedy in the future with some careful sanding. Perhaps there are variations amongst models but I simply don’t see the need for the additional material and it is my biggest cosmetic complaint.
Of course there seems to be no holster options for a Hi Power with this add-on rail, and certainly none that accommodate an accessory so I’ll likely use a generic nylon holster in the rare case that I’ll be wearing this combination.
Rated 5 out of 5
John (verified owner)–
Purchased for my Browning. This is my duty weapon and I carry it everywhere. Perfect fit! Absolutely love it.
We haven’t tested it with that specific model and we can't confirm compatibility. If we release a compatible version in the future, we’ll be sure to notify our mailing list.
Hi! I have a Glock 19 Gen 2 with a Recover Tactical Rail installed so i can mount a light. My question is, are there any holsters that you know of that will accommodate my Glcok 19 without a light attached - none of my current holsters will fit? Thank you. - Terry -
0 votes
QHi! I have a Glock 19 Gen 2 with a Recover Tactical Rail installed so i can mount a light. My que......
Read more answer now
A
You can reach out to MIE Production as they make custom holster that is compatible with our kit.
will this grip system fit a browning bad 45 sig Sauer edition or is there one that will fit and how do I order the right one
0 votes
Qwill this grip system fit a browning bad 45 sig Sauer edition or is there one that will fit and h......
Read more answer now
A
We haven’t tested it with that specific model and we can't confirm compatibility. If we release a compatible version in the future, we’ll be sure to notify our mailing list.
HPC Grip and Rail System for the Browning and FN Hi Power / Will this match-up / fit the Springfield SA-35?
0 votes
QHPC Grip and Rail System for the Browning and FN Hi Power / Will this match-up / fit the Springfi......
Read more answer now
A
No, the HPC is not compatible with Springfield SA-35.
Hello, I am inquiring about the Grip and Rail System, I have a FEG P9R 9mm. Do you know if this will work on this model? http://www.hungariae.com/FegP9R.htm
0 votes
QHello, I am inquiring about the Grip and Rail System, I have a FEG P9R 9mm. Do you know if this w......
Read more answer now
A
We haven’t tested it with that specific model. The HPC is only been tested to fit Browning and FN Hi Power. If we release a compatible version in the future, we’ll be sure to notify our mailing list.
I am unfamiliar with what counts as a high power. Would this be compatible with a Girsan MC P35 high power?
1 vote
QI am unfamiliar with what counts as a high power. Would this be compatible with a Girsan MC P35 h......
Read more answer now
A
We haven’t tested it with that specific model. If we release a compatible version in the future, we’ll be sure to notify our mailing list.
AAnswering my own question for anyone else curious. I purched this for my MC P35 and it fits flawlessly.
Would this fit the detective model, or if the end user chopped the end of the rail off, would that ruin the usability of the system?
0 votes
QWould this fit the detective model, or if the end user chopped the end of the rail off, would tha......
Read more answer now
A
We haven’t had the chance to test it with that specific model yet. If we release a compatible version in the future, we’ll make sure to notify our mailing list.
AAnswer, it fits the girsan p35 pi it will just be longer than barrel. I removed the excess frame with a dremel tool. It is still rock solid and had me it my go to gun. Until they come up with a shorter option, this is in my opinion, the way to go!
Are you planning on making a version to for the m57 Tokarev? If so, I’ll buy 2!
0 votes
QAre you planning on making a version to for the m57 Tokarev? If so, I’ll buy 2!answer now
Probably. But it might need some modifications. Feel free to try it and return it as per money-back guarantee if it does not work out. If you do try it, let us know here. I'm sure other users will appreciate a definitive answer.
We built it for guns (not airsoft). If the airsoft is an exact clone, it will work.
Have u ever tried fitting this to a FEG hi power? Thank you for your reply
0 votes
QHave u ever tried fitting this to a FEG hi power? Thank you for your replyanswer now
AHaven't tried. Could work. It might need to be modified to fit correctly.
Is there a version of this or something else that will work for my Browning 1911 .380 Black Lable Pro?
0 votes
QIs there a version of this or something else that will work for my Browning 1911 .380 Black Lable......
Read more answer now
A
Not yet
Why won't this work on a FEG hi-power clone?????
0 votes
QWhy won't this work on a FEG hi-power clone?????answer now
A
It might - but it has only been tested on OEM Hi-Power
I have a Tisa regent BR9 clone...will this work?
0 votes
QI have a Tisa regent BR9 clone...will this work?answer now
A
Yes it will
Will this work with 1952 FN Browning High Power with Safety Fast System installed? Or will it require Dremel fitting?
0 votes
QWill this work with 1952 FN Browning High Power with Safety Fast System installed? Or will it req......
Read more answer now
A
Most likely some modifications will be required
Will this grip/rail fit the Browning BDM?
0 votes
QWill this grip/rail fit the Browning BDM?answer now
A
No
AWith just a little dremel work, it will work with the Safety Fast System. I just did it!
Will this work with the HiPower RDIH extended slide stop/release?
0 votes
QWill this work with the HiPower RDIH extended slide stop/release?answer now
A
It won't
AWith a little Dremel work under the extended slide stop to basically extend the cut of the original slide stop and remove the grip material all the way back under the safety lever. Now clean up your cut and it works very well. Obviously, do this before you install the left side grip module. I just did it to mine, and I couldn’t be happier with it.
Replacement Hardware for all Grip and Rail Systems, Rails and Charging Handles
Philipp Eibner (verified owner) –
I purchased the rail in tan to give an old gun a newer more tactical look. Overall I am really happy with the quality, teh materials and the feel of the gun.
I give 4 Stars instead of 5 just because I got it in a different colour than I ordered it (I ordered tan but got green).
The Curious Airgunner –
What a neat add-on to my! Ingilis GP-35 Hi-Power! I enjoy old style handguns. I have 2 sets of standard wooden grips. Saw this on sale and had to try it after some research.
It fits perfectly and allows me to mount a light or laser.
My Hi-Power is now my home defense weapon. .light and all.
Thanks for a great product.
Ken Ryno –
Recover Tactical has made it possible to mount accessories to my Browning Hi-Power which until now was not possible without professional gunsmithing. I am thoroughly pleased with your product!
Jamey Jones (verified owner) –
Did not like the original wooden grips that came on my Springfield Armory SA35 and thusly planned to semi-retire the gun after only a couple of outings. Stumbled across the RECOVER grips and decided to take a chance that they’d fit. They fit perfectly and the difference is amazing! The gun is now a pleasure to shoot and won’t be going into semi-retirement!
David Lewis (verified owner) –
Really nice fit. Extension happy with product, and the ability to be able to put a light on my favorite carry pistol. Took less than 10 minutes to install, and I was extremely happy to see there were no gaps when it was on.
Neal Craig Beverly (verified owner) –
Put the new cover on my 30 year old Hi-Power and I couldn’t be more pleased. Fit was perfect and it has a modern look and a functional rail. Thanks for the great product!
Arne Sauwen (verified owner) –
Greetings from Belgium. I decided to order one in black for my MK1 last year, now I find myself ordering a second one in tan for my MK3. Awesome product!
Wayne Crewe (verified owner) –
Good day
I have received my grip and rail for the HP Browning. Looks stunning. Im probably the only person in South Africa owning one. Thank you so much for my product
Jerry –
1995 Browning Hi Power 40 cal. I decided to pick up a set of Recover Tactical grip & rail panels in OD because I thought they looked interesting. Previously had Hogue grips with finger grooves, which I am a big fan of already but they’re somewhat boring.
The finish on the panels is much cleaner and smooth than I saw in some Ebay pictures, so that was a pleasant surprise. I did, however, read a prerelease article somewhere that said they won’t lose zero for a laser. While I can see how that might be true for any of the other models that they support, I think that the single screw at the rear of the grip for the Hi Power that holds it directly to the frame allows for too much movement. Perhaps the panels could use a little reinforcement around the trigger guard, or something that causes it to snug up a bit more, but there is approximately 1/4 inch of movement at the front of the frame. So while I think this is not an issue for a weapon light, it looks like an issue for anyone relying on a laser (albeit not much of an issue at close range).
I have seen some photos online showing a perfect alignment with the contour of the slide (near the “box” opening above the rail, but there is about a 1/4 inch misalignment for mine. I am not too focused on that, but that misalignment carries out past the front of the slide. This seems quite sloppy to me, but is something I can always remedy in the future with some careful sanding. Perhaps there are variations amongst models but I simply don’t see the need for the additional material and it is my biggest cosmetic complaint.
Of course there seems to be no holster options for a Hi Power with this add-on rail, and certainly none that accommodate an accessory so I’ll likely use a generic nylon holster in the rare case that I’ll be wearing this combination.
John (verified owner) –
Purchased for my Browning. This is my duty weapon and I carry it everywhere. Perfect fit! Absolutely love it.