Is this holster legal for Steel Challenge SCSA?

We cannot verify that specifically, as it would really depend on the SCSA rules and how they choose to enforce them.

Hello will this fit a Canik TTI Combat ? Thanks

The G7 holster is designed for full-size pistols with an integral rail. Based on the specifications of the TTI Combat, the adapter should be compatible with that model.

Will this fit the VP9L and CZ sp01 and p01?

We haven't officially tested it yet, but from the looks of it, it will not work with the CZ SP-01 and P-01 due to the specific distance between the trigger guard and the rail. However, based on the frame geometry of the VP9L, it looks like it might work with the G7.

Will this work for the Beretta m9 with a recover tactical rail system?

No, it only works with pistols that have an integral rail.

Wondering about fit/comparability with HK P2000 .40sw with below mods: with comp weight compensator/rail on stock stock barrel with same compensator/rail on extended/threaded barrel Smith and Wesson shield 9mm with recover rail stock with extended/threaded barrel Strike Industries quad comp Springfield XD service model .40sw stock

The G7 Holster is built to fit most full-size double-stack pistols with a rail, including the HK P2000 and the Springfield XD series. However, it will not work with the S&W Shield as the G7 adapter is not compatible with the Recover rail.

Hello, will this work with a Hi-Point YC9 with optics installed?

No, the G7 Holster is designed for full-size pistols with an integral rail. Based on the design of the Hi-Point YC9, the trigger guard does not appear to be compatible with the G7 holster.

Is this compatible with the S&W M&P 9c

No, the G7 is only compatible with full-size pistol with integral rail.

Is this holster compatible with the new S Pro brace?

No, the S-Pro is not compatible with any of our holsters.

Will this work with the PSA Rock 5.7. It’s a full sized with a rail.

We haven't tested it with that specific model, but based on the design, the notch appears to be too far from the trigger guard. Because of this, the adapter may not reach the trigger guard properly once installed.

What's the difference between passive and active retention?

Passive retention relies on the friction and molded shape of the holster to hold the gun, requiring no extra step to draw. Active retention uses a manual locking mechanism, like a thumb lever, that the user must intentionally disengage before drawing the firearm, adding an extra layer of security.

Will it work for my Sig p365 fuse?

Yes, the G7 holsters are designed for full-size pistols with an integral rail.

Does the G7 holster fit GLOCK 19X GEN5? What other handguns do they fit?

Yes, it is compatible with the Glock 19X Gen 5. The holster is designed to work with full-size pistols that have an integral rail.

hello. will this fit an IWI Masada full size?

Yes, as this holster is designed for full-size pistols with an integral rail.

Will this fit a Ruger Security-380, if not do u have something compatible that looks good as this holster?

No, the G7 is compatible with a pistol with a full-size rail (approximately 58mm or 2.28 inches)

Will this work with a Sig p322?

We haven't specifically tested it with those models, but based on the specifications, it should work with the Sig P322. The rail needs to be a full-size length (approximately 58mm or 2.28 inches).

Can I use your holster for Stacatto2011: Model CS 2024?

We haven't tested it. You're welcome to test it out. Please let us know how it goes.

Does it work with a Taurus G2C

It's not clear to me if your pic rail is long enough. Feel free to try and return if it does not fit.

Will this work with a Glock G20 10mm?

What Gen? Is it an MOS? If it has a built-in pic rail (as opposed to a Glock rail), it will work. If you aren't sure, send photos of both sides of your gun to service@recovertactical.com and we will check for you.

Will the G7 owb work with the Taurus tx22?

G7 works by attaching to the pic rail - but it does need to be a full size pic rail in order to attach securely. From what I can see, you should have no issues with any of the full size TX22s. I'm not sure about the compact frame models. Feel free to try and return as per our money back guarantee if it does not work out.

Why pistol need to be double stacked? I have 1911 with integral rail, will it work?

If it's a full size rail, it should work.

Will the holster work with a HK usp?

The 2 requirements for compatibility are double-stack magazine (seems all full size USP's meet this requirement), and the 2nd requirement is a built-in factory pic rail (MIL-STD-1913). From what I can tell, some USP's do have this. Do you know if your model has a pic rail? If not, post the exact model/variant here and I can check for you.

Would this work for a Beretta apx chambered in 9mm? It's a double stack.

Which Beretta APX? If it has a pic rail with at least slots, it should work perfectly.

I have purchased the full G7 kit but wish to mount it to MOLLE. Is the holster compatible with the Safariland MLS 16?

It's compatible with IMI and Cytac molle mounting systems. I don't think it's compatible with Safariland

Wondering if the g7 is compatible with the FN Five-Seven Mkp2?

Haven't tested with this particular model but from what I can see, it should fit. Feel free to try and return if it does not as per our money back guarantee

G7 is compatible with Smith and Wesson 380 Shield EZ performance M2.0?

Looks like it will not. Your rail isn't long enough to accommodate the adapter

Will there be an option to obtain an adapter with the cutouts needed to install the FG20?

No cutouts or adapters needed. It already fits

I just recently discovered this holster and I fell in love. I have a Canik TP9 Elite Combat that I would love to run with this. Exactly how can I make this happen and what options do I need to go with? I like to carry a tlr-1hl on it as well. Please tell me it’s compatible

Nice to hear! I believe it will work with your exact setup. Haven't tested though. You can see several Canik user-submitted photos with G7 at the bottom of this page. If you want the full setup, just select that from the dropdown above. It includes the Holster, Paddle, and Rail/Holster Adapter. Feel free to try and return as per our money-back guarantee if it does not work out.

Will the basic 9.95 holster work w/Dagger Compact w/ Extended Brl muzzle protector? 4.5” Brl Pistol does have rail slots & uses Dble stack Glock mags.

The $9.95 option is not the holster - just the proprietary rail adapter that works with the holster system which consists of the Holster, Paddle, and Adapter. If the rail on your Dagger is full-size length (approx. 58mm or 2.28in), it will probably work. Feel free to try and return if it does not as per our money-back guarantee.