Is there a source or way to order different insert panels for the CC3P?

At this time, we do not have any panel inserts available for the CC3P. If we do offer them in the future, we will certainly announce it to our mailing list.

Do you have any rail adapters for 1911 3.25 inch barrel?

We do have the CC3C Grip for officer size 1911.https://recovertactical.com/product/recover-cc3c-grip-and-rail-system-for-the-compact-1911-officers-sized-1911/

Will this fit M1911-A1 FSP GI 5” 45 ??

If your 1911 is a full-size pistol without an integral rail our CC3P grip and rail system could work. The best way to know for sure if it will fit is to measure these points on your weapon (in millimeters). If they match, it will fit:

Hi There would this fit a GSG 1911 .22? If this doesn't fit can you recommend a similar set of grips? Do you post to Northern Ireland?

It fits standard Frame 1911s only, no “double stacks” or compact frames. Our kits and accessories are not available for shipping outside the U.S.

Is this grip adapter, and the model without interchangable grip panels, compatible with thin line grip screws and escutcheons or does it require standard grip screws and escutcheons?

We recommend using the thin one but it is compatible with both.

Will this fit a 1911 with an ambi safety (specifically a safety with the little wing that sits behind the grip on the right side) or will I need to remove material from under the grip to accommodate that little wing?

Yes, it should be compatible. Just to be sure you can check by measuring these points on your gun. If they match, it will fit.

will this fit into the safari land 6304 - ALS/SLS Tactical Holster?

The Safari Land 6304 - ALS/SLS Tactical Holster is a custom fit holster for the 1911. Adding the Recover rail will slightly increase the width, which may cause a fitment issue after installation of the rail.

Do you know if this will fit a llama max-1 45 l/f ?

No, it will not fit the Llama Max.

Will the nitecore npl30 fit on the grip and rail system

According to their website, the light is designed for rails at least 4" long. Our rail is 1.8" long. Although, I do find that spec strange. A 4" rail is really long which would make this light incompatible with most pistols. I suspect that may be an error.

Do you of this will fit a duty holster? I know for instance some of the holsters like for a Glock with a tact light option will work with most 1911's as long as there's a tact light on it. Sure the holster locking on the light mostly rather then the frame.

As far as I know there are no off-the-shelf duty holsters that this would fit. It would likely need to be custom made. Have you considered our HC11 holster (scroll down to the bottom) - specifically designed for this setup?

Which One Will fit on a Taurus 1911 9mm Full - CC3H Or CC3P? Dimensions Total Length - 221.9mm Total Height - 139mm Width - 37.4mm Pipe Length - 127mm Thanks in Advance.

Both CC3H & CC3P are for full size 1911's. The difference between them is that CC3P has interchangeable grip panels while CC3H does not.

Will they fit a tisas 1911 carry?

It depends on the model. If it is a full size, single stack, with no built-in rail, it will work

Will this fit a girsan MC1911C XLV

It's not clear to me if this is a full-size 1911 or not. If it is, it will fit. You can check by measuring these points on your gun. If they match, it will fit.

Do you sell, or can I request a different color grip insert with the cc3p grip and rail system?

Yes. There are a few options in the dropdown menu above.

Where can I purchase grip panels for this ?

"Talon Grips" makes replacement panels for this unit.

Will this fit a Browning 1911-380

This is for full size 1911's. Your gun should be compatible with our CC3C system. Check it here. Just be sure to check the measurements on the page against your gun.

Does this fit a citadel 1911?

Citadel makes several models. The best way to know for sure if it will fit is to measure these points on your weapon (in millimeters). If they match, it will fit:

Will this fit a springfield emissary 45?

It won't. This is designed for 1911's that do not have a rail. The model you mentioned has a built-in rail.

Is there this product for model IMBEL (Brazil) 1911 MD2 GC 45 (2011) ? product website link https://www.imbel.gov.br/index.php/pistolas/88 link image below: https://www.imbel.gov.br/images/produtos/pistolas/45GCMD2.png

It looks like it should fit but if you want to be sure, measure these points on your gun. If they match, it will fit

Can this be used with a magwell? (Full-size Kimber 1911 with kimber magwell)

It works with most - but we haven't tested with the Kimber one. If it doesn't work, you can always send it back for a refund as per our money back guarantee.

Will it fit a Chiappa 1911-22

It sounds like you may have an incompatible weapon. Please send an email with photos to service@recovertactical.com. They will either be able to help you figure this out or give you instructions for return and refund.

Is this compatible with a Surefire X300U-A or Surefire X300U-B?

Yes. It is compatible with both

Will it fit a norinco 1911 7 round mag

Check these points on your gun to measure for compatibility

Is this compatible with any Inside the Waistband holsters?

Yes. You can order compatible holsters from these vendors: https://www.swaprigholsters.com/ https://www.mieproductions.com/ https://www.whitehatholsters.com/ https://www.cooksholsters.com/

Will it fit my Kimber custom 1911 LW45

Yes, as long as it doesn't have a rail

Will this fit any double stack 1911's?

It is not compatible with double stack.

Will these fit a RIA cs 1911 in 9mm

The CC3C will fit. Click here for the CC3C

Skip to navigation Skip to content

Your Cart

Search for:

Shop
Merch
User Photos
About
Shipping & Delivery
Account
Support
Affiliates
Dealers
- Become a Dealer

0

[pc-notice]

Home / Products tagged “All Full Sized Frame No Rail (RI)”

All Full Sized Frame No Rail (RI)

Show Filters

Showing the single result

-9% Out of stock

1911, 1911 Grips, 1911 Only, All Full Sized Frame - Valor / Heritage no Bobtail (CZ), All Full Sized Frame No Rail, All Full Sized Frame No Rail (armory), All Full Sized Frame No Rail (Colt), All Full Sized Frame No Rail (GSG), All Full Sized Frame No Rail (Kimber), All Full Sized Frame No Rail (RI), All Full Sized Frame No Rail (S&W), All Full Sized Single Stacks (PO), All Remington R1, All SR1911's (Rugar), Best Selling Products, Featured, Grip & Rail Systems, Grip & Rail Systems, Newest Products, Picatinny Rails, PT1911, WS

Recover Tactical CC3P Grip & Rail System for the 1911
Rated 4.80 out of 5
$49.95 Select options

Showing the single result

Free Worldwide shipping

On all orders above $39.95

Easy 30 days returns

30 days money back guarantee

International Warranty

Offered in the country of usage

100% Secure Checkout

PayPal / MasterCard / Visa

Email Sign up

We create innovative pistol stabilizers, chassis systems, conversion kits, optics, and tactical accessories that enhance accuracy, stability, and functionality of standard handguns. Our products transform pistols into rifle-style, more versatile shooting platforms with improved ergonomics. All of our products are manufactured in Israel using aerospace-grade materials. Privacy Policy & Terms of Use | Sitemap

✕

Have a question about
compatibility or anything else?

First Name

Email

Message

https://www.recovertactical.com//product-tag/all-full-sized-frame-no-rail-ri/

Δ

Question submitted successfully. We will get back to you asap.

x

Affiliate Program